"IZHWAX" CORRECTOR for epoxy compounds
It is used to remove bubbles from the surface of an uncured composition, as well as for leveling the surface.
Compatible with all epoxy based materials.
METHOD OF APPLICATION:
1. Spray the corrector immediately onto the surface of the composition that has not yet been cured.
2. Apply to the surface from a distance of 10-15 cm. Do not leave untreated areas.
The cylinder is under pressure! HIGHLY FLAMMABLE! Protect from direct sunlight and heat above 50ºC. Do not spray near open flames, heaters, or hot objects. Apply the composition in a well-ventilated area. Do not disassemble or give to children. Follow fire safety precautions. Do not inhale. In case of contact with eyes, rinse with water, seek medical advice. When using, wear personal protective equipment for respiratory organs, hands, eyes, and special clothing.
Mixture of solvents, reagents, hydrocarbon propellant.
Aerosol can, volume 400 ml, net weight 0.27 kg.
Store at a temperature not exceeding 50ºC. Protect from impacts and direct sunlight.
Subject to storage conditions, the shelf life is 24 months from the date of manufacture.