Mold cleaner "IZHWAX CLEANER"

Mold cleaner "IZHWAX CLEANER" is a special solvent mixture for the effective and quick removal of most release agents, residues of grease, wax, styrene and other contaminants. Does not matte the surface of the mold. Suitable for preparing the surface of the mold before using a wax or polyvinyl release agent, as well as for cleaning tools and equipment.


To remove contaminants and to prepare the mold for use, wipe it with a cotton cloth dampened with a cleaner. Use a hard, natural bristle brush to remove large contaminants. After cleaning the mold, without waiting for the solvent to completely evaporate, wipe the mold with a paper towel to remove any remaining stains.

To completely clean the mold, several stages of cleansing may be required.

To check the harmful effects of the cleaner on the mold material, apply it to the back of the mold. Wait a while. If there are no changes, it is allowed to start.


Apply the cleaner in a well-ventilated area. Follow fire safety precautions (use away from heaters, open flames, and hot objects). Do not inhale. 
In case of contact with eyes, rinse with water, seek medical attention. When applying, use personal protective equipment for respiratory organs, skin of hands, and eyes.

Plastic bottle, 1.2 liters.

Store at a temperature not exceeding 50ºC in a tightly closed container away from fire and hot objects. Avoid direct sunlight.

Subject to storage conditions, the shelf life is 24 months from the date of manufacture.

Фото СМЫВКА цвет.png